@Article{HeinMort:2021:ThExTh,
author = "Hein, Lucas Lemos and Mortean, M. V. V.",
affiliation = "{Instituto Nacional de Pesquisas Espaciais (INPE)} and
{Universidade Federal de Santa Catarina (UFSC)}",
title = "Theoretical and experimental thermal performance analysis of an
additively manufactured polymer compact heat exchanger",
journal = "International Communications in Heat and Mass Tranfer",
year = "2021",
volume = "124",
pages = "e105237",
month = "May",
keywords = "Compact heat exchanger, 3D printing, Additive manufacturing,
Polymer heat exchanger, Selective laser sintering, Fused
deposition modeling.",
abstract = "Compact heat exchangers are characterized by high heat transfer
surface area per unit of volume, mainly used in applications where
space and weight are restricted, present in the aerospace,
automotive and naval sectors. The study of new technologies to
produce compact heat exchangers has grown considerably in recent
years. One of the technologies that presents a great potential for
this application, and which has been little explored, is additive
manufacturing. This work presents a feasibility analysis of
additive manufacturing to produce polymer compact heat exchangers.
Experimental tests in prototypes, using the Fused Deposition
Modeling (FDM) and Selective Laser Sintering (SLS) technologies,
were taken, aiming to evaluate the thermal and hydrodynamic
behavior of the heat exchangers. They were tested with air at room
temperature and water at high temperatures, over a wide Reynolds
number range, from laminar to turbulent flow, comprising 150
experimental tests. Additionally, a mathematical model to predict
the thermal behavior of the prototype was developed and validated
experimentally, the theoretical and experimental heat transfer
rate showed good agreement, with an average error of approximately
3.5%. Even with low thermal conductivity of the polymer, an
overall heat transfer coefficient of 194 W/m2K was achieved.",
doi = "10.1016/j.icheatmasstransfer.2021.105237",
url = "http://dx.doi.org/10.1016/j.icheatmasstransfer.2021.105237",
issn = "0735-1933",
language = "en",
targetfile = "hein_theoretical.pdf",
urlaccessdate = "09 maio 2024"
}